Cigars

learn the basics

Origins of Cigar

The inhabitants of the islands of the Caribbean Sea, Mexico, and Mesoamerica have smoked cigars since as early as the 10th century, as evidenced by the discovery of a ceramic vessel at a Mayan archaeological site in Uaxactún, Guatemala. The vessel was decorated with the painted figure of a man smoking a primitive cigar.

It is Christopher Columbus who is generally credited with the introduction of tobacco to Europe. Two of Columbus’s crewmen during his 1492 journey, Rodrigo de Jerez and Luis de Torres, are said to have encountered tobacco for the first time on the island of San Salvador in the Bahamas, when natives presented them with dry leaves that spread a peculiar fragrance. Tobacco was widely diffused among all of the islands of the Caribbean and therefore they again encountered it in Cuba, where Columbus and his men had settled.

Around 1592, the Spanish galleon San Clemente brought 50 kilograms of tobacco seed to the Philippines over the Acapulco-Manila trade route. The seed was then distributed among the Roman Catholic missions, where the clerics found excellent climates and soils for growing high-quality tobacco on Philippine soil.

In the 19th century, cigar smoking was common, while cigarettes were still comparatively rare. The cigar business was an important industry, and factories employed many people before mechanized manufacturing of cigars became practical. Many modern cigars, as a matter of prestige and quality, are still rolled by hand, most especially in Central America and Cuba: some boxes bear the phrase totalmente a mano (totally by hand) or hecho a mano (made by hand).

We do not know when it was first grown, or smoked, but we can be pretty certain that the inhabitants of Europe were unaware of tobacco until after Columbus s epic voyage of 1492.

Two of his sailors reported that the Cuban Indians smoked a primitive form of cigar, with twisted, dried tobacco leaves rolled in other leaves such as palm or plantain. In due course, Spanish and other European sailors caught the habit, as did the Conquistadors, and smoking spread to Spain and Portugal and eventually France, most probably through Jean Nicot, the French ambassador to Portugal, who gave his name to nicotine. Later, the habit spread to Italy and, after Sir Walter Raleigh's voyages to America, to Britain.

Smoking was familiar throughout Europe - in pipes in Britain - by the mid-16th century and, half a century later, tobacco started to be grown commercially in America. Tobacco was originally thought to have medicinal qualities, but there were already some who considered it evil and it was denounced by Philip II of Spain, and James I of England. The word cigar originated from sikar, the Mayan-Indian word for smoking, which became cigarro in Spanish, although the word itself, and variations on it, did not come into general use until the mid-18th century.

Cigars, more or less in the form that we know them today, were first made in Spain in the early 18th century, using Cuban tobacco. At that time, no cigars were exported from Cuba.

By 1790, cigar manufacture had spread north of the Pyrenees, with small factories being set up in France and Germany.

The Dutch, too, started making cigars using tobacco from their Far Eastern colonies. But cigar smoking only became a widespread custom in France and Britain after the Peninsular War (1808-14), when returning British and French veterans made fashionable the habit they had learned while serving in Spain.

Production of "segars" began in Britain in 1820, and in 1821 an Act of Parliament was needed to set out regulations governing their production. Because of an import tax, foreign cigars in Britain were already regarded as a luxury item.

Soon there was a demand for higher quality cigars in Europe, and Spanish cigars were superseded by those made in Cuba, which was then a Spanish colony, where cigar production had started during the mid-18th century. Cigars, European smokers discovered, traveled better than tobacco. The cigar probably arrived in North America in 1762, when Israel Putnam, later an American general in the American War of Independence (1774-1778), returned from Cuba, where he had served in the British army. He came back to his home in Connecticut, where tobacco had been grown by settlers since the 17th century, with a selection of Havana cigars and large amounts of Cuban tobacco seed. Cigar factories were later set up in the Connecticut area, processing the tobacco grown from the Cuban seed. In the early 19th century American domestic production started to take off and Cuban cigars also began to be imported in significant numbers. But cigar smoking did not really boom in the United States until around the time of the Civil War in the 1860s, with individual brands emerging by the late 19th century. By then the cigar had become a status symbol in the United States.

During the same period, cigar smoking had become so popular among gentlemen in Britain and France that European trains introduced smoking cars to accommodate them, and hotels and clubs boasted smoking rooms. The after-dinner cigar, accompanied by glasses of port or brandy, also became a tradition. This ritual was given an added boost by the fact that the Prince of Wales, the future Edward VII and a leader of fashion, was a devotee, much to the annoyance of his mother, Queen Victoria, who disliked smoking.

Quality cigars are still hand-made. An experienced cigar-roller can produce hundreds of very good, nearly identical, cigars per day. The rollers keep the tobacco moist—especially the wrapper—and use specially designed crescent-shaped knives, called chavetas, to form the filler and wrapper leaves quickly and accurately. Once rolled, the cigars are stored in wooden forms as they dry, in which their uncapped ends are cut to a uniform size. From this stage, the cigar is a complete product that can be “laid down” and aged for decades if kept as close to 21°C (70°F), and 70% relative humidity, as the environment will allow. Once cigars have been purchased, proper storage is usually accomplished by keeping the cigars in a specialized wooden box, or humidor, where conditions can be carefully controlled for long periods of time. Even if a cigar becomes dry, it can be successfully re-humidified so long as it has not been handled carelessly.

Some cigars, especially premium brands, use different varieties of tobacco for the filler and the wrapper. “Long filler cigars” are a far higher quality of cigar, using long leaves throughout. These cigars also use a third variety of tobacco leaf, a “binder”, between the filler and the outer wrapper. This permits the makers to use more delicate and attractive leaves as a wrapper. These high-quality cigars almost always blend varieties of tobacco. Even Cuban long-filler cigars will combine tobaccos from different parts of the island to incorporate several different flavors.

In low-grade and machine-made cigars, chopped up tobacco leaves are used for the filler, and long leaves or even a type of “paper” made from tobacco pulp is used for the wrapper which binds the cigar together. This alters the burning characteristics of the cigar, causing hand-made cigars to be sought-after.

Historically, a lector or reader was always employed to entertain the cigar factory workers. This practice became obsolete once audio books for portable music players became available, but it is still practiced in some Cuban factories. The name for the Montecristo cigar brand may have arisen from this practice.

Time

To really appreciate your cigar, smoke slowly and not draw too frequently, which will heat it and spoil the taste. You should take about a puff a minute. To smoke a corona should take about one half hour, and the bigger cigars such as a Churchill or a Double Corona can take more than an hour.

Other than that, there are many times that are especially good for cigar smoking – after meals being a particularly popular choice. There’s nothing quite like relaxing in a comfortable chair with a cigar and a nice stiff drink. A good rule of thumb is to always allow yourself at least an hour to properly appreciate the cigar. Some of the bigger cigars may require more time even than this.

Before You Light Up


1. If you use a match, wait till the sulphur burns off before using it to light you cigar. Also if you can find those fancy long cedar matches all the better.

2. If you use a lighter, use a butane one. The gasoline based ones impart a foul flavor to your smoke.

3. Some people claim that the only proper implement for lighting up is a cedar spill. A cedar spill is a long thin strip of spanish cedar which is lit first and then used in turn to light your cigar. You will typically see these in use at fancy cigar dinners, rather elegant way to light your stogie, but not all that practical in the car.

Steps to Light the Cigar

1. Preheat the foot (the open end) by slowly rolling the cigar above the flame at an angle allowing a tiny black ring forms all the way around the wrapper. Don’t allow the flame to touch the cigar.

2. With the cigar in your mouth and drawing in as you repeat the process, slowly roll the cigar at an angle above the flame (about .5 inch or so away), without letting the lighter flame actually touch the cigar. Remember to slowly spin the cigar to establish an even burn.

3. Once it is lit, pull it from your mouth and actually look at the glowing foot to see if it lit properly. If the burn is really uneven, repeat the previous step on the appropriate side to even the burn. You can also gently blow on the end in the appropriate place to intensify the heat there, take a couple steady draws, then just wait a minute before continuing to puff. This short delay seems to allow the cigar a chance to stabilize and self correct the burn.

Inhaling

You should not inhale the cigar smoke. The high alkalinity and poor amount of nicotine will make you cough and besides, you can enjoy a cigar’s flavor and body without inhaling.

Smoke Rings

The biggest factor in blowing good smoke rings is practice. With that in mind, Try this technique. First, you need a cigar with dense smoke, and a place with still air. Don’t waste your time trying to blow smoke rings in a breeze! Draw a thick puff of smoke into your mouth. Hold it there and open your mouth slowly. Make an “O” with your mouth, (maybe more of a rounded “oh”) – definitely not a pucker like a kiss. Curl the tip of your tongue down, and pull your tongue all the way back. Now, when blowing a ring, you’re actually not exhaling. You’re just pushing out the smoke in your mouth with your tongue in short bursts – like a piston, only in a relaxed way. It’s actually a really gentle motion. Push forward with your tongue, with perhaps a slight recoil at the bottom.

The Hold

Holding a cigar is not like holding a cigarette, though many attempt to hold them the same way. A cigar should not be held between your index and middle finger like a cigarette, instead hold it between your index finger and thumb.

The Cigar Band

Many have wondered if you should remove the band from the cigar before lighting it. It is really a personal choice to remove the band of the cigar, but do consider that in certain places it is considered rude to advertise the brand you’re smoking. If you decide to take off the band, wait until you have smoked the cigar for a few minutes. The heat will make the gum on the band less adhesive and easier to remove without tearing the delicate wrapper.

How to Cut a Cigar

First, it is very important to make a clean cut so ensure you have a quality cigar cutter. A clean cut made with the right tools and in the right place will decrease your chances of having the cigar unravel, which may make for an unpleasant smoke. A clear and regular cut is key.

At the head of the cigar (the covered end that goes in your mouth), you will see the cap, which is a round piece of tobacco that is glued to the head to keep the wrapper together. This cap is put on the head of the cigar during the hand-rolling process to keep it from unraveling and drying out. You should see a distinct line where the cap ends.

You only want to remove the outer layer of wrapper, not cut off a centimeter of tobacco. To ensure a clean cut and to avoid tearing the wrapper, cut just before the cap leaving 3-4 mm. (Tip: On figurados, just cut off enough so you can see the filler.) For the best results, try making one quick, strong movement. Tip: For bullet punch cutters, insert the punch on the head of the cigar to cleanly cut a small hole. If you prefer lots of smoke, you’ll want to cut a bigger hole so you would need to punch several times in that area of the cap. Bullet punch cutters are popular because of their key ring accessibility, but unfortunately, they will not work on Figuardo’s.

How to Ash a Cigar

I have been told it is bad form to shake the ash of a cigar, why?

That is because the better the cigar has been made the longer the ash. However, it is not necessary to shake the cigars to make the ash fall prematurely, nor is there need to try to keep it as long as possible: too long, it obstructs the airflow and irregular combustion develops. I will admit that I have been guilty of this because it is fun to see how long you can keep the ash!

When to Put it Out

When a cigar begins to let off too much heat and leaves an aftertaste in your mouth (generally during the last 2 inches), it is time to put it off. You don’t have to put off a cigar like a cigarette by crushing it on an ashtray: just let it stop burning by itself inside the ashtray. Do throw it away soon to avoid impregnating the room with the tenacious odor of cold tobacco.

Drink and Food Suggestions

Cigar Gastronomy
Choosing Best DrinkCoffee and Cigars
Whiskey or Scotch
Beer and Cigars
Rum and Cigars
Cognac vs. Cigars
Tequila And Cigars
Port and cigars

Comments

Unknown said…
Thanks for sharing the information regarding cigars.I like the tips and the information regarding how to smoke a cigar.Cigar smoking is a non hurried,if you will affair that must be savored and enjoyed to the fullest.

Fuente Cigars 

Popular posts from this blog

Dress Code: 'Hotel Wear'

Michael Jackson’s Most Memorable Hotel Visits